24, Attach the Backrest Cap (40) to the Backrest
Frame (17) with two M4 x 16mm Serf-tapping
Screws (104),
Attach a Bumper (168) to the Backrest Frame
(17) with an M4 x 16mm Serf-tapping Screw (104)
and an M4 Washer (157),
Attach the Right Pivot Guard (42) to the Backrest
Frame (17) with two M4 x 9mm Serf-tapping
Screws (106), Attach the Loft Pivot Guard (41}
in the same manner.
25, Attach the Backrest (24) to the Backrest Frame
(17) with four M6 x 38mm Screws (128) and four
M6 Washers (126),
26, Unsert the rod on the Backrest Frame (17) into the
sUotin the Seat Carriage (16), HoJd the Backrest
Frame vertically
over the Seat Carriage and
shale the rod into the slot, as shown in the
inset drawing.
24
25
26
168
157
106
42
41
28
126
1
16
\
104
-%
104
15