Connecting Source Components To The Dhd Controller; Hdmi Source Connections - Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual

Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-11.
Use the HDMI inputs whenever possible. This ensures the highest
Tip
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
You can also connect computers with DVI output to these inputs.
Note
Refer to Supported Timings on page 105 for a list of compatible
input signals.
HDMI
AV OUT
Figure 3-11. HDMI Source Connections
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
RIGGERS Display Control
USB RS-232
2 3
To Accessory Box
HDMI Out
HDMI 1 HDMI 3
To Display
Video 2
Video 3
HDMI Out
HDMI 2 HDMI 4 Ethernet
Audio Only
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)
IR
RS-232
PC / Control
HDMI
AV OUT
HDMI
AV OUT
31
Installation
Connecting Source
Components to the DHD
Controller