Specifications; Sc-50D/Sc-60D Projector Specifications - Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual

Table 7-1 lists the SC-50d/SC-60d projector specifications.
Table 7-1. SC-50d/SC-60d Projector Specifications
Projector Type:
Native Resolution:
Lamp Life:
Aspect Ratios:
DTV Compatibility:
Picture Size (16:9 Screen),
SC-50d:
Picture Size (16:9 Screen),
SC-50d:
Processing:
Control Options:
Inputs:
Video Standards:
Calibration:
Throw Distance
(Factor x Screen Width):
Horizontal & Vertical Offset:
Light Output:
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
Texas Instruments Digital Light Processing™ (DLP) dual
imaging system, SuperOnyx™ DMD™
Full HD 1920 x 1080 (1080p)
SC-50d - 2,000 hours typical
SC-60d - 1,300 hours typical
4:3, Letterbox, 16:9, VirtualWide, Cinema, Virtual Cinema,
Native
Refer to Table 7-2
Recommended Width: 100 - 132 in.
Maximum Width: 264 in.
Recommended Width: 120 - 198 in.
Maximum Width: 420 in.
Runco DHD4 Processor with ViVix IV™ technology and BRiC
(Backup, Recovery and Clone) tool
• Serial commands via RS-232
• Discrete infrared (IR) remote
• Consumer Electronics Control (CEC) protocol support via
HDMI
• Ethernet
Refer to Table 7-2
NTSC, PAL, SECAM, CEA-861D
ISF Certified Calibration Configuration
Refer to Table 3-3
Refer to Table 3-4
SC-50d:
CSMS Specifications* – Private Cinema Calibration:
3,471 ANSI Lumens; 126 Foot-Lamberts (fL)
Uncalibrated: 6,000 ANSI Lumens
SC-60d:
CSMS Specifications* – Private Cinema Calibration:
5,785 ANSI Lumens; 210 Foot-Lamberts (fL)
Uncalibrated: 10,000 ANSI Lumens
*Measured on a 1.0 gain, 84" wide 16:9 screen

7. Specifications

99
Specifications
7.1
SC-50d/SC-60d
Projector
Specifications