Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual page 83

Table 4-2 lists the x- and y-coordinates for each color temperature preset in "Simple"
mode.
Table 4-2. Color Temperature Presets and Associated Color Points
Color Temperature Preset
3200K
5500K
6500K
7500K
9300K
• Color Gamut: Select Color Gamut from the Display Color - Common Settings menu to
select a color gamut (range) that may be different from the default color gamut.
Each setting defines the precise hue of each primary (red, green and blue) and
secondary (yellow, cyan and magenta) color component used to generate the millions
of colors produced in displays. Changing this setting relocates the "triangle" for
possible colors (see Figure 4-7). For example, changing the x/y coordinates for red
moves the color closer to either orange or violet, which in turn affects all displayed
colors having a red component.
The DHD Controller uses the Color Gamut settings for all display
Note
modes on a given input.
• The default setting, Auto, automatically chooses the appropriate color gamut:
• SMPTE C for NTSC, 480i and 480p sources.
• EBU for PAL, SECAM, 576i and 576p sources.
• REC709 for all other sources.
• Select REC709 to use the color gamut defined in ITU-R BT.709-5.
• Select SMPTE-C to use the color gamut defined in SMPTE 170M-1999.
• Select EBU to use the color gamut defined in EBU Tech. 3213-E.
• Select PCE to use the Personal Color Equalizer feature of the SC-50d/SC-60d. PCE
lets you define a custom color gamut. Refer to the next section, PCE, for instructions
on how to do this.
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
Associated x/y Values
x
0.423
0.332
0.313
0.299
0.284
67
y
0.404
0.348
0.329
0.315
0.298
Operation