Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual page 85

The Auto Color Enable and Test Pattern Enable checkboxes let you choose what to
display on-screen while making these adjustments. These controls work together as
follows:
Auto Color Enable
Setting
Off
Off
On
On
• Lamp: Select Lamp from the Display Color - Projector Settings menu to adjust the
projector lamp brightness.
• Power: To supply a constant wattage to the lamps, select Power from the Lamp
menu to set the lamp power level. You can choose to run the lamps as bright as
possible (this is the default setting) or you can choose a lower setting. Generally,
lower lamp output prolongs the life of a lamp, but decreases brightness.
The Lamp Power setting affects both lamps.
Note
• SatCo (Yellow Notch Filter): Select SatCo from the Display Color - Projector
Settings menu to enable (Off) or disable (On) the yellow notch filter in the projector. The
Off setting produces a wider color gamut, while the On setting produces higher
brightness.
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
Test Pattern Enable
Setting
Off When both boxes are unchecked, the input
signal (normal picture) appears on the
display.
On When only the Test Pattern Enable box is
checked, a white "curtain" test pattern
appears instead of the input signal.
Off When only the Auto Color Enable box is
checked, the input signal appears on the
display.
When you select a red, green or blue color
point to adjust, the DHD Controller displays
only that color channel. When you select a
white point x- or y-value, all colors are
visible (normal picture).
On When both boxes are checked, the DHD
Controller automatically displays a red,
green, blue or white "curtain" test pattern
when you select an x- or y-value for that
color point to adjust.
Description
69
Operation