Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual page 84

Operation
Display Color
RGBW
Red x
Red y
Green x
Green y
Blue x
Blue y
White x
White y
Auto Color Enable
Test Pattern Enable
Table 4-3 lists the Color Gamut settings and associated x- and y-coordinates for each
primary and secondary color component.
Table 4-3. x/y Color Gamut Values
Primary
Color
Red
Yellow
Green
Cyan
Blue
Magenta
• PCE: To use the Personal Color Equalizer to define a custom color gamut, choose the
"PCE" Color Gamut setting (refer to Color Gamut on page 67). Then, choose PCE
from the Display Color - Common Settings menu and press ENTER.
Note
PCE provides the ability to define a custom color gamut in terms of a "white point" and
primary (red, green, blue) color points; see Figure 4-7.
• RGBW (Red, Green, Blue, White): To precisely adjust the primary color points and
white point associated with the custom color gamut, choose RGBW from the PCE
sub-menu. Each control operates only on the color specified. Surrounding colors are
linearly interpolated based on their distance from each of these colors.
0.640
0.330
0.300
0.600
0.150
0.060
0.313
0.329
Color Gamut Settings and Associated x/y Values
REC709
x y
0.640 0.330
0.419 0.505
0.300 0.600
0.225 0.329
0.150 0.060
0.321 0.154
The DHD Controller uses the PCE settings for all display modes on
a given input.
68 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
SMPTE "C"
x y
0.635 0.340
0.421 0.506
0.305 0.595
0.228 0.326
0.155 0.070
0.318 0.162
EBU
x y
0.640 0.330
0.418 0.502
0.290 0.600
0.220 0.329
0.150 0.060
0.328 0.158