Connecting Source Components To The Dhd Controller; Hdmi Source Connections - Runco Q-750d Ultra Series Installation & Operation Manual

Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-12.
Use the HDMI inputs whenever possible. This ensures the highest
Tip
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
You can also connect computers with DVI output to these inputs.
Note
Refer to Supported Timings on page 115 for a list of compatible
input signals.
HDMI
AV OUT
Figure 3-12. HDMI Source Connections
Q-750d Ultra Series Installation/Operation Manual
RIGGERS RIGGERS Display Control Display Control
USB USB RS-232 RS-232
2 2 3 3
To Accessory Box To Accessory Box
HDMI Out HDMI Out
HDMI 1 HDMI 3 To Display To Display
Video 2 Video 2
Video 3 Video 3
HDMI Out HDMI Out
HDMI 2 HDMI 4 Ethernet Ethernet
Audio Only Audio Only
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)
IR IR
HDMI
AV OUT
HDMI
AV OUT
33
Installation
Connecting Source
Components to the DHD
Controller