Connecting Source Components To The Dhd Controller; Hdmi Source Connections - Runco Signature Cinema SC-50d Series Installation & Operation Manual

Connect your video sources to the DHD Controller as shown and described in the
sections that follow.
HDMI Source Connections: See Figure 3-11.
Tip
Note
HDMI
AV OUT
Figure 3-11. HDMI Source Connections
Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
Downloaded From projector-manual.com Runco Manuals
Use the HDMI inputs whenever possible. This ensures the highest
video quality because the signal is carried in the digital domain
throughout the entire signal path, from source component output
into the projector.
You can also connect computers with DVI output to these inputs.
Refer to Supported Timings on page 103 for a list of compatible
input signals.
RIGGERS
USB RS-232
2 3
To Accessory Box
HDMI 1 HDMI 3
Video 2
Video 3
HDMI 2 HDMI 4 Ethernet
HDMI
AV OUT
HDMI sources (BD, DVD, DTV Set-Top Box etc.)
Display Control
IR
HDMI Out
To Display
RS-232
PC / Control
HDMI Out
Audio Only
HDMI
AV OUT
HDMI
AV OUT
31
Installation
Connecting Source
Components to the DHD
Controller