Dhd Controller Front Panel - Runco SIGNATURE CINEMA SC-50d Series Installation & Operation Manual

Controls and Functions
2.3
DHD Controller Front
Panel
4
1
Figure 2-3. DHD Controller Front Panel
Figure 2-3 shows the controls and indicators on the DHD Controller front panel; the
paragraphs that follow describe them.
SC-50d/SC-60d
16:9
2 3
1. RUNCO ICON (Blue)
Lights solid to indicate that the controller is on or powering up.
2. IR SENSOR
Receives IR commands from the remote control.
3. VACUUM FLUORESCENT DISPLAY
Can be used instead of the On-Screen Display (OSD). Displays currently-selected
menu or – if no menu is selected – the connected display device model, current
source, input resolution and aspect ratio.
4. ON/STANDBY BUTTON
Press once to toggle from standby mode to on mode. Press it again to return to
standby mode. For a discrete on or off command, you can use the direct access
buttons on the remote control.
5. LEFT BUTTON
Used to direct-select inputs or move the OSD menu cursor to the left. When no menu
is present on-screen, the LEFT button toggles through the different sources, in this
order:
HDMI 4 - HDMI 3 - HDMI 2 - HDMI 1 - SCART - HD 2 - HD 1 - Component -
Composite 3 - Composite 2 - Composite 1
6. DOWN BUTTON
Use to direct-select aspect ratios or move the OSD menu cursor down. When no
menu is present on-screen, this button toggles through the different aspect ratios, in
this order:
16:9 - 4:3 - Letterbox - VirtualWide - Cinema - Virtual Cinema - Native
standby
HDMI 1
1080i/60
4
8 Signature Cinema™ SC-50d/SC-60d Installation/Operation Manual
11 10 9
m
e
n
u
5 6 7 8