Icom IC-V80 Instruction Manual page 9
Vhf/uhf transceivers
Hide thumbs
Also See for IC-V80:
- Instruction manual (64 pages) ,
- Quick manual (2 pages) ,
- Step-by-step programming manual (2 pages)
Table of Contents
Advertisement
Previous view
2
PANEL DESCRIPTION
D KEYPAD
➥ While in the VFO mode, push to enter numbers for
frequency input.
frequency input.
➥ While in the memory mode, push to enter numbers to
select a
select a memory channel.
memory channel.
➥ Push to enter or send a DTMF code. (pp. 33, 34)
➥ To activate the second function of a key, fi rst push
[FUNC](M), and then push the key.
[1] • [ TONE](1)
➥ Numeric input and DTMF code: '1'
nput and DTMF code: '1'
➥ After pushing [FUNC](M), selects a Tone func-
tion. (p. 31)
[2] • [VOX](2)
➥ Numeric input and DTMF code: '2'
nput and DTMF code: '2'
➥ After pushing [FUNC](M), turns the VOX func-
tion ON or OFF*. (p. 49)
* Only when an optional headset and plug
adapter are connected.
[3] • [T.SCAN](3)
➥ Numeric input and DTMF code: '3'
nput and DTMF code: '3'
➥ After pushing [FUNC](M), starts a tone scan.
(p. 32)
[4] • [DUP](4)
➥ Numeric input and DTMF code: '4'
nput and DTMF code: '4'
➥ After pushing [FUNC](M), selects minus du-
plex, plus duplex, or simplex operation. (p. 18)
[5] • [SCAN](5)
➥ Numeric input and DTMF code: '5'
nput and DTMF code: '5'
➥ After pushing [FUNC](M), starts a scan.
(p. 26)
[6] • [SKIP](6)
➥ Numeric input and DTMF code: '6'
nput and DTMF code: '6'
➥ After pushing [FUNC](M), sets or cancels the
skip setting. (p. 28)
enter numbers for
enter numbers to
3
[7] • [PRIO](7)
➥ Numeric input and DTMF code: '7'
nput and DTMF code: '7'
➥ After pushing [FUNC](M), starts a priority
watch. (p. 29)
[8] • [SET](8)
➥ Numeric input and DTMF code: '8'
nput and DTMF code: '8'
➥ After pushing [FUNC](M), enters the Set mode.
(p. 36)
[9] • [H/M/L](9)
➥ Numeric input and DTMF code: '9'
nput and DTMF code: '9'
➥ After pushing [FUNC](M), selects high, mid or
low output power. (p. 15)
[0] • [DTMF-M](0)
➥ Numeric input and DTMF code: '0'
nput and DTMF code: '0'
➥ After pushing [FUNC](M), enters the DTMF
memory mode. (p. 33)
[M] • [FUNC](M)
➥ DTMF code: '
DTMF code: 'M (indication: E)' '
➥ Push to access the second function of other
keys.
[# ENT] • [
](# ENT)
➥ DTMF code: '
DTMF code: '# (indication: F)' '
➥ After entering a frequency, push to save it.
(p. 13)
➥ Push to exit the Set mode or Initial Set mode.
(pp. 36, 40)
➥ After pushing [FUNC](M), hold down for 1 sec-
ond to turn the Key Lock function ON or OFF.
(p. 15)
Hide quick links:
Advertisement
Table of Contents
