Memory Scan; Setting Skip Channels; Scan Resume Setting - Icom IC-V80 Instruction Manual

Previous view
7
SCAN OPERATION

■ Memory Scan

Repeatedly scans memory channels, except those set
as skip channels, described in the next scan topic.
q Push [VFO/MR/CALL] several times to select the
memory mode.
• "X" appears.
w Push [FUNC](M), and then push [SCAN](5) to start
the scan.
• To change the scan direction, push [Y] or [Z].
e To cancel the scan, push any key except [ ], [Y]/
[Z], [MONI] or [FUNC](M).

■ Setting skip channels

The Memory Skip function speeds up scanning by not
scanning those memory channels set as skip channels.
Set skip channels as follows.
q Push [VFO/MR/CALL] several times to select the
memory mode.
w Push [Y] or [Z] to select the memory channel to be
skipped.
e Push [FUNC](M), and then push [SKIP](6) to set the
channel as a skip channel.
• "SKIP" appears.

■ Scan resume setting

Various pause and timer options can be selected with
the Scan Resume function. The selected resume op-
tion is also used for Priority Watch.
q Push [FUNC](M), and then push [SET](8) to enter the
Set mode.
w Push [Y] or [Z] to select the scan pause timer item
(SCt, or SCP).
e Rotate [VOL] to select the desired scan resume op-
tion.
• "SCt. 5/10/15" : Timer scan
The scan pauses for 5 to 15 seconds,
when a signal is received.
• "SCP. 2" : Pause scan
The scan pauses, then resumes 2 sec-
onds after the signal disappears.
r Push [# ENT] to exit the Set mode.
Push several times to select the memory mode.
Push , and then push
[i.e.]: Setting memory channel 11 as the skip channel.
Push or to select channel 11.
Push , and push
Appears
• The "Scan pause timer" item in the Set mode
(Pause scan is selected.)
(Timer scan (15 seconds) is selected.)
28
(Memory mode)
(The memory scan starts.)
.
.