Pocket Beep - Icom IC-V80 Instruction Manual

Previous view
8
TONE SQUELCH AND POCKET BEEP
D Operation
q Set the operating frequency, or select a memory chan-
nel or Call channel.
w Push [FUNC](M), and then push [SET](8) to enter the
Set mode.
e Set the tone frequency, or DTCS code and DTCS po-
larity.
r Push [# ENT] to exit the Set mode.
t Push [FUNC](M), and then push [TONE](1) several
times, until the icon of desired Tone function ap-
pears.
• " " : CTCSS squelch
• " " : DTCS squelch
D
y Operate the transceiver in a normal way; push [PTT]
to transmit, release [PTT] to receive.
u When a signal with matched tone or code is received,
the squelch opens and audio is heard.
• To manually open the squelch, push [MONI].
• If the signal includes an unmatched tone, the squelch
does not open. However, the icon shows the strength of
the received signal.
i To cancel the tone or DTCS squelch, push [FUNC](M),
and then push [TONE](1) several times, until the tone
icon disappears.
✔ CONVENIENT!
Squelch burst:
While using the tone squelch, noise may be heard just
when the received signal disappears.
To eliminate the noise, the IC-U80/IC-U80E has the
Squelch Burst function.
See page 44 for details.
■ Pocket Beep function
This function uses subaudible tones for calling, and can
be used as a "common pager" to inform you that someone
has called while you were away from the transceiver.
q Set the operating frequency, or select the memory
channel or Call channel.
w Push [FUNC](M), and then push [SET](8) to enter the
Set mode.
e Set the tone frequency, or DTCS code and DTCS po-
larity.
r Push [# ENT] to exit the Set mode.
t Push [FUNC](M), and then push [TONE](1) several
times, until the icon of desired Tone function and " "
appear.
• " " and " " : CTCSS Pocket Beep function
• " " and " " : DTCS Pocket Beep function
D
y When a signal with matched tone or code is received,
beep tones sound and " " blinks.
• To stop the beeps and blinking, push any key .
u To cancel the tone or DTCS squelch, push [FUNC](M),
and then push [TONE](1) several times, until the tone
icon disappears.
Push , and then push
Repeater tone
Tone squelch with

pocket beep

Tone squelch
DTCS encoder (Only TX)
Push , and then push
to turn ON the Pocket Beep function.
Tone squelch with pocket beep
31
to sequentially select the tone function.
Function OFF
DTCS squelch
DTCS squelch with
pocket beep
several times
DTCS squelch with pocket beep