Ic-U80/Ic-U80E - Icom IC-V80 Instruction Manual

Previous view
15
SPECIFICATIONS

■ IC-U80/IC-U80E

D General
• Frequency coverage
• Mode
• Number of memory channels
• Usable temperature range
• Tuning steps
• Frequency stability
• Power supply
• Current drain (at 7.2 V DC: typical)
Transmit at 4 W (High)
at 2 W (Mid)
at 0.5 W (Low)
Receive standby
power save
maximum audio
• Antenna connector
• Dimensions (projections not included)
• Weight (approximately)
D Transmitter
• Modulation system
• Output power (at 7.2 V DC)
• Maximum frequency deviation
• Spurious emissions
• External mic. connector
D Receiver
• Receive system
• Intermediate frequencies
• Sensitivity (at 12 dB SINAD)
• Squelch sensitivity (threshold)
• Selectivity
• Spurious and image rejection
• Intermodulation
• Audio output power (at 10% distortion) :
Internal speaker
External speaker
• External speaker connector
All stated specifi cations are subject to change without notice or obligation.
: 400.000–470.000 MHz
: FM, FM-N
: 207 (including 6 scan edges and 1 Call channel)
: –20°C to +60°C; –4°F to +140°F
: 5, 10, 12.5, 15, 20, 25, 30 and 50 kHz
: ±2.5 ppm (–20°C to +60°C; –4°F to +140°F)
: Icom specifi ed battery pack or case
:
1.4 A
1.0 A
0.5 A
: 58 mA
32 mA
280 mA (internal speaker)
160 mA (external speaker)
: BNC (50 Ω)
: 58(W) × 112(H) × 30(D) mm; 2.3(W) × 4.4(H) × 1.2(D) in
: 140 g; 4.9 oz (without battery pack, case and antenna)
: Variable reactance frequency modulation
: High 4 W, Mid 2 W, Low 0.5 W
: FM (wide) ±5.0 kHz
FM (narrow) ±2.5 kHz
: Less than –65 dBc
: 3-conductor 2.5 (d) mm (
: Double-conversion superheterodyne
: 1st: 46.35 MHz, 2nd: 450 kHz
: 0.2 µV typical
: 0.11 µV typical
: FM (wide) 70 dB typical
FM (narrow) 60 dB typical
: 70 dB typical
: 70 dB typical
0.75 W typical with a 16 Ω load
0.4 W typical with a 8 Ω load
: 3-conductor 3.5(d) mm; (
52
1
⁄ ˝)/2.2 kΩ
10
˝)/8 Ω
1
⁄
8