Clearing Memory Contents; Display Type - Icom IC-V80 Instruction Manual

Previous view
6
MEMORY/CALL OPERATION

■ Clearing memory contents

Contents of programmed memories can be cleared (blanked).
q Push [VFO/MR/CALL] several times to select the
memory or Call channel mode.
For only USA version:
Select any mode other than the weather channel mode.
w Push [FUNC](M), and then push [VFO/MR/CALL].
• "X" and "--" blink.
e Push [Y] or [Z] to select the channel to be cleared.
• Memory channels not yet programmed are blank.
r Perform the following operation within 1.5 seconds,
otherwise the transceiver returns to the memory
mode without clearing memory.
1 Push [ F UN C] (M) , an d th e n m om e n ta r ily p u sh
[VFO/MR/CALL].
2 Push [FUNC](M), and then hold down [VFO/MR/CALL]
for 1 second
• 3 beeps sound, and then the memory channel is
cleared.
t Push [VFO/MR/CALL] to return to the previous mode.
NOTE: Be careful!— the contents of cleared memo-
ries CANNOT be recalled.

■ Display type

The transceiver has 3 memory mode display types to
suit your operating style.
Select the display type in the Initial Set mode. (p. 43)
"Frequency display"
Displays the programmed frequency.
"Channel number display"
Displays the memory channel number. Only pro-
grammed channels are displayed, and modes other
than the memory mode cannot be selected.
NOTE: When the channel number display is selected, only
the memory mode is selectable, and only the following
functions can be used.
• Scan function (p. 26)
• Setting output power (p. 15)
• DTMF Memory function (p. 33)
• Key Lock function (p. 15)
• Setting of following items in the Set mode (p. 36)
The scan resume, function key timer, LCD backlight, VOX-
related settings, microphone gain and DTMF TX key.
"Channel name display"
Displays the channel name you have assigned. Only
programmed channels are displayed.
• If no channel name is programmed, the programmed fre-
quency will be displayed.
• Hold down [MONI] to check the programmed frequency.
NOTE: When the display type is "Channel name," you must
select the VFO mode to enter the Set mode.
[i.e.]: Clearing memory channel 11.
Push , and then
Push or to select channel 11.
Perform the following operation within 1.5 seconds
Push , and then push
and push , and then hold down
Push to return to the previous mode.
Frequency display
Channel number display
Channel name display
Hold down to check the programmed frequency.
24
.
,
for 1 second again.
• The "Display type" item
in the Initial Set mode
("Frequency" is selected.)
("Channel" is selected.)
("Name" is selected.)