Vox Function - Icom IC-V80 Instruction Manual

Vhf/uhf transceivers
Hide thumbs Also See for IC-V80:
Table of Contents

Advertisement

Previous view
14
OPTIONS

■ VOX function

The transceiver has a VOX function, which allows
hands-free operation.
An optional HS-94, HS-95 or HS-97 headset and the
OPC-2004 plug adapter cable are also required for op-
eration.
What is VOX?
The VOX (voice operated transmission) function starts trans-
mission when you speak into the microphone, without push-
ing [PTT]; and then, automatically returns to reception when
you stop speaking.
D Optional unit connection
q Hold down [
] for 1 second to turn OFF the power.
w Remove the jack cover. (p. 1)
e Connect the optional HS-94, HS-95 or HS-97 and
OPC-2004.
D Turning the VOX function ON or OFF
q Connect an optional headset and plug adapter cable
to the transceiver, and then turn ON the power.
w Push [FUNC](M), and then push [VOX](2) to turn the
VOX function ON or OFF.
• "VOX" appears when the VOX function is ON.
NOTE:
• When using the VOX function, adjust the microphone
gain and the VOX-related settings (p. 50) to suit your
operating environment (including your headset per-
formance).
• Set the microphone gain before setting the VOX
gain in the Set mode (p. 39). We recommend set-
ting the microphone gain to 3.
When 'TX permission' is set to
, you cannot transmit using the VOX function
(p. 39)
"OFF" in the Set mode
.
49
OPC-2004
w
q
[
]
(Power OFF)
Push
, and then push
HS-94
e
.
Appears

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ic-v80eIc-u80Ic-u80e

Table of Contents