Advertisement
• Connect HDMI cable to NVR and HD TV
(can also connect to VGA monitor or TV, cables not included)
• Connect Mouse to USB port on back of NVR
(can also use remote control)
• Connect 12V adapter to NVR and connect 48V power adapter to POE ports
on NVR
• Connect both power supplies to surge protector using supplied cables
• Connect surge protector to power outlet
• Turn on switch on surge protector and back of NVR
• Run Wizard to setup NVR
• Connect cameras to CAT5E cable
• Connect CAT5E cable to POE port on NVR
• After verifying that cameras are working, mount cameras in desired
location
Product Set-up
Advertisement
