FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Buttons On Receiver Mode switching Switch between quad mode and single channel mode Pairing Pairing the cameras and receiver Menu OSD menu display Auto Scan Switching the channels automatically with set time interval Right/CH2 Move to the Right / Switch to Channel 2 Up/CH1 Move Up / Switch to Channel 1 Manual Scan...
Camera Installation Camera stand mounting screw (for ceiling mount) Power in cable (DC 5V input) Pairing button SMA antenna plug Camera stand mounting screw (for desk top mount) Microphone...
Menu Enter the Menu option to setup the main feature of this product. Through Right/Left button can adjust parameters, and through Up/Down button can select the features to set. Resolution (High / Low) : When set to low, the image is not as clear, but it displays more frames per second.
TV OUT: This option allows you to select the video format (NTSC/PAL) for video output resources. In the United States we use NTSC format. Channel selection buttons You may select channels by using the corresponding buttons on the receiver to manually choose channel.
10 Notes 10.1 This product can be damaged by pressure or impact. 10.2 Any repair of this product should only be done by Professionals. 10.3 This product should only be opened by Professionals.
10.6 Digital Peripheral Solutions does not accept responsibility for any illegal use of this product by the customer. Q-SEE PRODUCT WARRANTY Thank you for choosing our products. All of our product users have a conditional free warranty repair service for hardware within 12 months starting from the purchase date, and a free exchange service within one month (valid for manufacturing defects).
Phone: 877-998-3440 x 538 8015 E. Crystal Dr Email: cs@dpsi-usa.com Anaheim, CA 92807 Website: Tech Support: http://www.q-see.com Phone: 877-998-3440 x 539 Fax: Email: ts@dpsi-usa.com 714-998-3509 The material in this document is the intellectual property of our company. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without our company’s prior written permission.