Install Usb 2.0 Driver; Using 6-Channel Audio - Foxconn 600A01 series User Manual

Install USB 2.0 Driver

Click <Install Driver> from the main menu and enter the install driver menu (as
shown in fig. 1). Click <USB 2.0 Driver> to open the USB 2.0 setup guide. Please
read the guide carefully and select the relevant installation method.
Click here

Using 6-Channel Audio

The motherboard is equipped with the VIA VT1616 chip, which provides support
for 6-Channel audio output, including 2 front, 2 rear, 1 center and 1 subwoofer
channel. This section will tell you how to install and use the 6-Channel audio
function on the board.
STEP 1. Connect the front channels to Line-in jack, the rear channels to Line-
out jack, and the Center/Subwoofer channels to Microphone jack.
Blue
Green
Red
70
600A01-FOXCONN-V1.0-BIOS-en.p65
Chapter 4
1
Front Left
Rear Left
600A01 Series User Manual
70
Driver CD Introduction
2
Center
Front Right
Rear Right
Subwoofer
2004-4-12, 13:31