Foxconn 600A01 series User Manual page 30

USB Headers: F_USB1, F_USB2
Besides four USB ports on the rear panel, the series of motherboards also have
two 10-pin headers on board which may connect to front panel USB cable
(optional) to provide additional four USB ports. The USB headers complies with
USB 2.0 specification that supports up to 480 Mbps connection speed.
Note:
1. You must install the driver before you can use the USB 2.0
function.
2. NEVER connect a 1394 cable to the F_USB1 or F_USB2
connector. Doing so will damage the motherboard!
3. The USB cable is an optional item.
22
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
600A01 Series User Manual
22
Installation Instructions
1
VCC VCC
D4- D0-
D4+ D0+
GND
GND
Empty GND
F_USB1
1
VCC VCC
D6-
D7-
D6+ D7+
GND
GND
Empty GND
F_USB2
2004-4-12, 13:30