Foxconn 600A01 series User Manual page 36

Warning:
The motherboard may be damaged if a 3.3V AGP card is used. Make
sure that your AGP card is 1.5V specification. Note the notches on
the card golden fingers to ensure that they fit the AGP slot on your
motherboard.
Installing an expansion card
1. Before installing the expansion card, read carefully the documentation that
came with it and make the necessary hardware settings for the card.
2. Make sure to unplug the power cord before adding or removing any expan-
sion cards.
3. Remove the bracket opposite the slot that you intend to use.
4. Align the card connector with the slot and press firmly until the card is
completely seated in the slot.
5. Secure the card to the chassis with the screw you removed earlier.
AGP Qualified Vendor List
The following table lists the AGP cards that have been tested and qualified for
use with this Motherboard.
Vender
CP
CP
CP
ECS
UNIKA
LeadTek
GA
Elsa
MSI
MSI
28
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
Type
ATI Radeon 7000
ATI 9700 AGP
ATI 9800 AGP
ECS-315T
GeForce 4 MX400
S650
GA-GF 1280 GeForce 2 MX
Elsa 511
MSI 8912 (FX5600)
MSI 8911(FX5200)
600A01 Series User Manual
28
Installation Instructions
Video Memory
64MB DDR
128MB DDR
128MB DDR
32MB SDRAM
32MB SDRAM
128MB DDR
32MB SDRAM
64MB DDR
128MB DDR
128MB DDR
2004-4-12, 13:30