Jumpers - Foxconn 600A01 series User Manual

Jumpers

The users can change the jumper settings on this motherboard if needed. This
section explains how to use the various functions of this motherboard by
changing the jumper settings. Users should read the following contents
carefully prior to modifying any jumper settings.
Description of Jumpers
1. For the jumpers on this motherboard, pin 1 can be identified by the silk-
screen printed "
labeled as "1".
2. The following table provides some explanation of the jumper pin settings.
User should refer to this when adjusting jumper settings.
Jumper Diagram
1
1
1
1
1
1
CPU Selection Jumper: J21
Set the jumper as close when the CPU's external frequency you used is 100MHz.
Otherwise leave this jumper to default.
30
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
" next to it. However, in this manual, pin 1 is simply
Definition
1-2 Set pin1 and pin2 closed
2-3 Set pin2 and pin3 closed
Closed Set the pin closed
Open Set the pin opened
600A01 Series User Manual
30
Installation Instructions
Description
1
Close
2
Open
1
2
(Default)
J21
2004-4-12, 13:30