Foxconn 600A01 series User Manual page 28

Front Panel Connector: FP1
This motherboard includes one connector for connecting the front panel switch
and LED indicators.
Hard Disk LED Connector (IDE_LED)
The connector connects to the case's IDE indicator LED indicating the activity
status of hard disk.
Reset Switch (RESET)
Attach the connector to the Reset switch on the front panel of the case; the
system will restart when the switch is pressed.
Power LED Connector (PLED)
Attach the connector to the power LED on the front panel of the case. The Power
LED indicates the system's status. When the system is in S0 status, the LED is
on. When the system is in S1 status, the LED is blink. When the system is in S3,
S4, S5 status, the LED is off.
20
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
1
600A01 Series User Manual
20
Installation Instructions
PIDE SIDE
1 + +
IDE_LED PLED
- -
RESET
PWRBTN#
NC
FP1
2004-4-12, 13:30