Foxconn 600A01 series User Manual page 45

Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large or Auto mode.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
Auto Recommended mode
IDE Channel 2/3 Master (optional)
These two items will show after you set "SATA Mode" as IDE in CMOS Setup and
restart your computer. In this way, Serial ATA hard disk will be used to IDE hard
disk.
Drive A/B
This option allows you to select the kind of FDD to be installed, including "None",
[360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and [2.88 M, 3.5 in].
Video
The following table is provided for your reference in setting the display mode for
your system.
EGA/VGA Enhanced Graphics Adapter / Video Graphic Array. For EGA,
VGA, SEGA, SVGA, or PGA monitor adapters.
CGA 40 Color Graphic Adapter, powering up in 40 column mode.
CGA 80 Color Graphic Adapter, powering up in 80 column mode.
MONO Monochrome adapter, including high resolution monochrome
adapters.
600A01-FOXCONN-V1.0-BIOS-en.p65
Chapter 3
600A01 Series User Manual
37
BIOS Description
37
2004-4-12, 13:31