Foxconn 600A01 series User Manual page 48

Chapter 3 BIOS Description
Advanced BIOS Features
Advanced BIOS Features Menu
Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing
<Enter>, you can select the HDD using the <PageUp>/<PageDown> or up/
down arrow keys, and change the HDD priority using <+> or <->; you can
exit this menu by pressing <Esc>.
Virus Warning (Default: Disabled)
Allows you to choose the VIRUS warning feature for IDE hard disk boot sector
protection. If this function is enabled and someone attempt to write data into
this area, BIOS will show a warning message on screen and an alarm will
beep. The setting values are: Disabled and Enabled.
Note: Such function provides protection to the start-up sector only; it does
not protect the entire hard disk.
CPU L1 & L2 Cache (Default: Enabled)
This option is used to enable or disable the L1 and L2 CPU cache. The
available setting values are: Disabled and Enabled.
CPU L2 Cache ECC Checking (Default: Enabled)
This option is used to enable or disable CPU L2 cache ECC Checking. The
setting values are: Disabled and Enabled.
Quick Power On Self Test (Default: Enabled)
Enable this option to shorten the power on testing (POST) and have your sys-
tem start up faster. The setting values are: Disabled and Enabled.
First/Second/Third Boot Device (Default: Floppy/Hard Disk/CDROM)
This option allows you to set the boot device's sequence. The setting
values are: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-
ZIP, USB-CDROM, LAN and Disabled.
40
600A01 Series User Manual
40 2004-4-12, 13:31
600A01-FOXCONN-V1.0-BIOS-en.p65