Expansion Slots - Foxconn 600A01 series User Manual

Expansion Slots

This motherboard includes five 32-bit Master PCI bus slots, one AGP slot, one
CNR slot (optional).
PCI Slots
The expansion cards can be installed in the five PCI slots. When you install or
take out such cards, you must make sure that the power plug has been pulled
out. Please read carefully the instructions provided for such cards, and install
and set the necessary hardware and software for such cards, such as the
jumper or BIOS setup.
AGP Slot
This motherboard has an AGP slot that supports 1.5V AGP card. AGP is an
interfacing specification designed to display 3D images. It provides a special-
ized 66Mhz, 32-bit channel to allow the graphic controller to directly access the
master memory, and supports 4X and 8X speeds.
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
600A01 Series User Manual
27
Installation Instructions
PCI Slots
AGP slot
2004-4-12, 13:30
27