Foxconn 600A01 series User Manual page 39

Clear CMOS Jumper: CLR_CMOS
This motherboard uses the CMOS RAM to store all the set parameters. The
CMOS can be cleared by removing the CMOS jumper.
How to clear CMOS?
1. Turn off the AC power supply and quickly connect pins 1 and 2 together using
the jumper cap.
2. Return the jumper setting to normal (pins 2 and 3 locked together with the
jumper cap).
3. Turn the AC power supply back on.
Warning:
1. Disconnect the power cable before adjusting the jumper settings.
2. Do not clear the CMOS while the system is turned on.
600A01-FOXCONN-V1.0-HW-en.p65
Chapter 2
600A01 Series User Manual
31
Installation Instructions
3
Clear CMOS
2
1
3
Normal Status
2
(Default)
1
CLR_CMOS
2004-4-12, 13:30
31