Using The Built-In Calculator; Saving To And Recalling From The Registers - Fluke 741B User Manual

Using the Built-in Calculator

For solving mathematical equations that involve the
calibrator's source or measured value, you can use
the calibrator's built-in calculator. The present
measure and source values, including units, are
always available to be inserted into an equation at a
single keystroke. The calibrator keeps measuring
and sourcing during calculator operation.
Start the calculator from the SOURCE, MEASURE,
or MEASURE/SOURCE mode by pressing the
softkey. You may have to press
the softkey.
Calc
After you press , the display, number keys, and
Calc
keys with calculator functions (
d, e
and ) become an algebraic-entry
calculator.
Press when you want to resume normal
Done
calibrator operation.
Calc
to get
More Choices
r, L, R, u,
Documenting Process Calibrator
Saving to and Recalling from the
Registers
When the calibrator is in calculator mode, the top half
of the display shows three register names and their
contents:
(the present measured value)
MEASURE
(the present sourced value)
SOURCE
(temporary storage for your use)
REGISTER
Insert the contents of any register into a calculation
by pressing the softkey followed by the softkey
Recall
for the desired register.
Press to copy the number from the calculator
Store
display (lower half) into
REGISTER
save the number for later use, or into
Using the Built-in Calculator
to temporarily
.
SOURCE
85