Communicating With A Pc (Model 743 Only); Maintenance; Replacing The Battery Pack - Fluke 741B User Manual

741B/743B
Users Manual
Communicating with a PC (Model
743 Only)
You can upload and download procedures and
saved results to a PC. An IBM PC
personal computer, Microsoft Windows, and Fluke
DPC/TRACK software, or a qualified Fluke partner's
software are required. A custom serial interface
cable for the 743B is included with DPC/TRACK .
Refer to the DPC/TRACK Users Manual for further
instructions.

Maintenance

Additional maintenance instructions,
including a calibration procedure and a list of
replaceable parts is available in the 74X
Series Calibration Manual (PN 602505).
96
TM
-compatible
Note

Replacing the Battery Pack

Replace the battery pack when it no longer holds a
charge for the rated interval. The battery normally
lasts for up to 1000 charge/discharge cycles. To
order a replacement battery, order Model BP7217
Nickel-Cadmium Battery Pack. In the USA and
Canada call Fluke Service Parts at 1-800-526-4731.
Outside the USA and Canada call +1 425-356-5500.
N
Do not mix spent Nickel-Cadmium
batteries with the solid waste stream. Spent
batteries should be disposed of by a
qualified recycler or hazardous materials
handler. Contact your authorized Fluke
Service Center for recycling information.
Note