Using The Built-In Help System; Accessing And Navigating The Help System - Fluke OptiView Getting Started Manual

TM
OptiView
Getting Started Guide
2. If you are analyzing multiple Access Points with different security
configuration (WEP keys, WPA certificate, WPA passphrase, User ID and
password), IP address, Name and Packet Stats will not be discovered for
those devices with a different WEP key than the one currently set in the
OptiView Wireless Network Analyzer Setup | Configuration screen.
3. In the Capture screen, the Source/Destination MAC filter supports Access
Point, and Access Point to client filtering. It does not support client-to-
client filtering. Entering two client MAC addresses will yield unexpected
results.
4. Decoder issue:
!

Using the Built-in Help System

Accessing and Navigating the Help System

When the Help is launched, the current screen topic is displayed. You can also
select a topic from the Contents (left pane), choose an Index entry, or perform a
full text Search on any analyzer help topic or term.
24
Shows incorrect Source/Destination MAC addresses if the option
"Configuration, Display, Display Network Address" is not checked.
The help system is an integral part of the OptiView Wireless Network
Analyzer. While using the analyzer user interface, help can be accessed
by selecting the Help button located on the bottom-right of the user
interface screen.
You can also press the Back and Forward buttons to move to and
from previous viewed topics.
The Hide button collapses the left pane of the Help screen giving
you more room to view Help topics. The Hide button is replaced
by the Show button. The Show button expands the left pane of the
Help screen.
The Print button allows you to either print the selected topic or
print the selected heading and all subtopics.