Table of Contents
Advertisement
Proceed as follows to set up the time and date
displays:
1. Press
.
2. Press the
Next Page
appears as follows:
3. Use the
and
keys to move the cursor to
the parameter you want to change, then press
or the
Choices
setting for that parameter. For example, the
following display appears after you select
:
Format
softkey. The display
gj38s.eps
softkey to choose a
Date
Documenting Process Calibrator
4. Press
or
to move the cursor to the desired
date format.
5. Press
to go back to the
6. Make another selection or press the
softkey or
to save your settings and exit
Setup mode.
Setting Up the Calibrator
gj39s.eps
display.
Done
25
Advertisement
Table of Contents
