Select Pv Model; Paired With Irradiance Meter Only - Fluke SMFT-1000 User Manual

SMFT-1000
Users Manual

Select PV Model

When the Irradiance Meter is not connected, no limits are available and no irradiance or
temperature data shows on the display.
To take a measurement:
1. Connect the test leads from the PV Analyzer to the solar panel.
Tip: Push
The V measurement shows on the display after you connect the test leads. The Pass/Fail
OC
icons do not show in this configuration.
2. Push  to start the I
The V and I
OC
3. Push 
A confirmation message with ID number shows on the display and then returns to the test
screen.

Paired with Irradiance Meter Only

When the Irradiance Meter is connected and a PV model is not selected, no limits are available.
The irradiance and temperature data from the Irradiance Meter shows on the display.
To take a measurement:
1. Connect the test leads from the PV Analyzer to the solar panel. The V
automatically shows on the display.
Tip: Push
The V measurement shows on the display after you connect the test leads. Irr & Tcell
OC
data from the Irradiance Meter shows on the display. The Pass/Fail icons do not show in
this configuration.
2. Push  to start the I
The V and I
OC
3. Push 
A confirmation message with ID number shows on the display and then returns to the test
screen.
22
Find Quality Products Online at:
 to see a connection diagram.
measurement.
SC
results show on the display.
SC
to save the results to memory.
 to see a connection diagram.
measurement.
SC
results show on the display.
SC
to save the results to memory.
GlobalTestSupply
www.
measurement
OC
.com
sales@GlobalTestSupply.com