Extron electronics VGA MATRIX SWITCHERS MVX PLUS 128 User Manual page 138

Specifi cations, Part Numbers, Accessories
Specifi cations
Video
Routing ........................................... 12 x 8 matrix
Gain ................................................. Unity
Bandwidth ...................................... >300 MHz (-3 dB) , fully loaded
Crosstalk ......................................... -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed ............................ 200 ns (max.)
Video input
Number/signal type ..................... 12 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, component
Connectors ..................................... 12 female 15-pin HD
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Return loss ...................................... <-30 dB @ 5 MHz
DC offset (max. allowable)........... 1.5 V
Video output
Number/signal type ..................... 8 RGBHV, RGBS, RGsB, HDTV component video, component video, S-video,
Connectors ..................................... 8 female 15-pin HD
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
Minimum/maximum levels ........ 0 V to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... -30 dB @ 5 MHz
DC offset ......................................... ±5 mV with input at 0 offset
Switching type ............................... Triple-Action
Sync
Input type ....................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................... RGBHV, RGBS, RGsB, RsGsBs (follows input)
Input level ...................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level ................................... AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Max input voltage ......................... 5.0 Vp-p
Max. propagation delay ............... 30 ns
Max. rise/fall time ........................ 4 ns
Polarity............................................ Positive or negative (follows input)
MVX Plus 128 VGA Matrix Switchers • Specifi cations, Part Numbers, Accessories
B-2 B
0 - 10 MHz ..................no more than +0.1 dB to -0.1 dB
0 - 130 MHz ................no more than +0.8 dB to -0.8 dB
video, S -video, composite video
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
composite video (follows input type)
0.7 Vp-p for RGB
0.3 Vp-p for R-Y and B-Y of component video, and for C of S-video
™
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates)