Table of Contents
Advertisement
MVX Plus 128 VGA Matrix Switchers, continued
Esc button cancels selections in progress and
resets the front panel button indications.
The Esc button does not reset: the current
confi guration, the RGBHV and audio
selection, any presets, or any audio level
or volume settings. On audio models, Esc
increments the level and volume. See Viewing
and adjusting the audio level in the next column.
RGBHV and Audio buttons select/deselect
video and/or audio. The Audio button blinks
to indicate audio breakaway. The Audio
button also selects the audio level/adjust
mode. See Viewing and adjusting the audio level
in the next column.
Create a tie
1. Press and release the RGBHV/Video and/or
Audio I/O button(s) to select or deselect
video and/or audio as desired.
I / O
RGBHV AUDIO
Green when selected.
Red when selected.
Off when deselected.
Off when deselected.
2. Press and release the desired input button.
The button lights to indicate the selection.
5
3. Press and release the desired output button(s).
Amber indicates RGBHV/video and audio tie.
Green indicates RGBHV/video only tie.
Red indicates audio only tie.
3
4
8
4. Press and release the Enter button.
MVX Plus 128 VGA Matrix Switchers • Quick Start
QS-2
Quick Start —
ENTER
Green indicates the need
to confirm the change.
Saing or recalling a preset
1. Save a preset — Press and hold the Preset
button for 2 seconds.
Recall a preset — Press and release the Preset
button.
Save a
2 seconds
PRESET
preset
Press and hold.
Recall a
PRESET
preset
Press and release.
All input and output buttons with
assigned presets light red.
The configuration data at assigned
preset locations will be overwritten.
1 2 3 4 5 6 7
2. Press and release the desired input or output
button.
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
1
ENTER
green to indicate the need
to activate the save or recall.
3. Press and release the Enter button.
Viewing and adjusting the audio level
1. Press and hold the Audio button.
2 seconds
AUDIO
Press and
Audio button blinks.
Hold
2. Press an input or output button. See chapter 3
to read the displayed value.
Press an Input button to adjust gain/attenuation.
5
Press an Output button to adjust volume.
Output buttons display gain/attenuation.
1
2
Input buttons display volume.
3. Increase and decrease the gain/attenuation
or volume level by pressing the Esc (
View (
) buttons.
<
4. Press and release the Audio button to exit.
button decreases
the level or volume.
the level or volume.
VIEW
PRESET
Preset button blinks.
PRESET
Preset button lights.
INPUTS
AUDIO
>
) and
button increases
ESC
Advertisement
Table of Contents
