Tools Menu - Extron electronics VGA MATRIX SWITCHERS MVX PLUS 128 User Manual

Matrix Software, cont'd

Tools menu

Assign device icons — Displays the complete set of input
Edit device palette — Allows you to add your own device
RGB delay settings — Displays the switching interval
Audio-Input gain settings — Displays the audio gain
Audio-Output volume settings — Displays the audio
View input frequencies — (DSVP) Displays the input horizontal and vertical
Update fi rmware — Allows you to replace the fi rmware that is coded on the
IP options — Allows you to set IP options. See IP Settings/Options window on
HTML fi le manager — Displays a list of HTML fi les installed on the switcher and
Hardware status — Provides an overall view of the status of the matrix switcher,
Figure 5-9 — Status window
MVX Plus 128 VGA Matrix Switchers • Matrix Software
5-16
and output device icons. You can drag any of these
icons to the input and output boxes.
icon graphics.
setting for each input and allows you to change them.
level setting for a single input or for all inputs and
allows you to change it. The level is expressed as
the magnitude (number of decibels) and polarity
(positive, gain or negative, attenuation) of the audio
adjustment.
output level setting for a single input or for all inputs
and allows you to change it. The level is expressed as a percentage of the
input audio volume that is applied to the output; 0% is full attenuation (audio
is silent), 100% is full volume.
frequencies for each input.
switcher's control board without taking the switcher out of service, opening
the switcher enclosure, and replacing the fi rmware chip set. See Updating
fi rmware on page 5-13.
page 5-6.
allows you to upload custom fi les from a connected PC to the switcher. See
Uploading HTML fi les on page 5-14.
including the power supply voltages, the temperature status, the Remote
RS-232/RS-422 port confi guration, and the installed and updated fi rmware
status (fi gure 5-9).