Changing Channels - Mitsubishi TS-4545 Owner's Manual

Changing channels (cont.)
changing channels one-by-one
To change channels:
O Press one of the channel scan
controls (CHANNEL) on the
control panel or on the remote
control. The TV will a'atomati-
cally tune to the next memo-
rized c:_annel.
_Important: You cannot change channels one-by-one until available channels
have been programmed into memory. (See "Memorizing channels"
in this chapter.)
changing channels dJLrectly
To move directly to a particular
channel without going through the
programmed channels in between:
Use tlhe number buttons on the
remol;e control to select the
number of the chanrLel you
want to view.
Press the ENTER butto:a.
Getting Started 49