Mitsubishi TS-4545 Owner's Manual page 71

_Important:
_Important:
Customizing the A/V memory position (cont.)
adjusting the closed caption decoder'
You can access the closed caption decoder screen using the MENU
or VIDEO button. When adjusting the closed caption decoder, you
can use the buttons on the remote control.
_] Video Function
Standard
[] Tint "_
[] Color ,
[] Contrast
_ rightness _
Sharpness
[] Color temp : Middle
[] Background : Black
[] _ : When muting
O00U:'
OOO_[
•4_..o/[i
access with the MENU button
O Press the MENU button on the
remote control. The TV Main
Menu will appear on the screen.
Use the ADJUST buttons to
select; "Select A/V Memory."
Press ENTER.
Select the closed caption display
by pressing the ADJUST up/
down buttons. Press the adjust
right or left button.
access with the VIDEO button
O Press the VIDEO button until
the dosed caption menu option
displays.
0 Press the ADJUST righffleft
buttons; to select the desired
closed caption signal.
(See the previous page for an explanation of the caption settings.)
If you set the decoder to a "text" setting and tune to a broadcaster
that is not sending a text signal, a large black rectangle will appear
on your screen. Press the HOME button to make the rectangle
disappear.
If you cannot display any captions on the screen, please keep in
mind that not all broadcasters, video tapes, or laserdiscs supply
closed caption signals.
Additionally, captions might not appear:
• if you are playing a video tape that is worn or deteriorated, or
• if you are starting to play a laserdisc or video tape from still or
search mode.
Getting Started 71