Changing Channels - Mitsubishi S6085 Operating Manual

Changing channels
_Important:
_Important:
Your Projection TV offers you four ways of changing channels once
their numbers have been programmed into channel memory:
• selecting channels one-by-one with the channel controls,
• directly accessing a channel by pressing t]he number buttons,
• using the special Quick View option to switch to a particular
memorized channel, and
• using the Super Quick View function to alternate between
channels on a user-chosen list.
To change channels faster, use either of the following procedures:
,i Enter three digits for every channel number: using zeros where
needed. (For example, enter "004" to view channel 4 and "028"
to view channel 28.)
I Press the ENTER button after selecting the :number of' the
channel. (For example, press "4" and "ENTER" to view
channel 4.)
Cable channel numbers 0 and greater than 126 are not used.
TV stations 0, l, and 70 through 999 are not used. If you selec.t one
of these channel numbers, your Projection 'IRr will not change
channels.
22 Chapter 2: Operating Your Projection TV