Mitsubishi TS-4545 Owner's Manual page 41

Using the remote control to operate VCRs, cable
boxes and other equipment
about your remote control
This TV's remote control has four "layers": the TV layer, t:he VCR-A
layer, the VCR-B layer, and the CABLE layer. Each layer can be
used to operate a different component in your A_a¢system. You
select the layer you want to use by setting the "select" switch across
the top of the remote control.
When you first receive your remote control, tlhe TV layer is set up
to operate your Mitsubishi TV, the VCR-A and VCR-B layers are
programmed to operate Mitsubishi VCRs, and the CABLE layer is
set to operate your cable box or satellite rece!iver.
You can use the following buttons to operate your TV.
• power button
• pause button
• mute control
• SuperQuickView button
• QuickView button
• volume control
• input button
• channel control
• enter button
• audio and video controls
• menu button
• cancel button
• information button
• home button
• sleep timer button
• number buttons
• PIP controls
• play button
If you have a cable box (including the digital satellite box), a non-
Mitsubishi VCR, a Mitsubishi laserdisc player, an AN receiver, or
a compact disc player, you can set up the layers in the remote
control to operate these components.
The VCR-A layer can be set up to operate a non-Mitsubishi VCR;
the VCR-B layer can be set to operate a VCR, cable box, or a
Mitsubishi laserdisc player; tlhe CABLE layer can be set up to
operate a cable box, laserdisc player, or A/V receiver; and the TV
layer can be set up to operate an A/V receiw_r.
setting up the remote control to operate your VCR
0
0
0
Turn off your VCR.
Set the select switch on the remote to choose the layer you
want to set up: VCR-A or VCR-B.
While holding in the POWER button on the remote contro!,
enter the code number listed in the chart on the following page
for your brand of VCR. Be sure to enter both digits of' the code
number. If more than one number is listed, try the first one.
Getting Started 41