Setting The Timer - Mitsubishi TS-4545 Owner's Manual

Setting the timer
This special feature allows you to program the TV to turn on
automatically at a specific time and to the channel that you set. To
set the timer:
[] TV Main Menu
[] First Time Setup
[] Customize Display
[] Advanced Features
[] Select A/V Memory
]ADJUST to select
ENTER to enter
MENU to exit menus
[] Advanced Features
[] Set the Timer
[] Use Parental Lock
[] Use SuperQuickView
r:_ Convergence
]ADJUST to select
ENTER to enter
[_ MENU to go back
[] Set the Timer
[] Day : Sunday
[] Start time : - - : ....
[_Antenna : --
[] Channel : - -
_--'} ADJUST to select
ENTER to enter
MENU to go back
O
O
O
O
Press the MENU button on the
remote control. The Mare Menu
will appear on the screen.
Use the ADJUST buttons to
selec_ "Advanced Features."
Press ENTER.
You 'will see the "Advanced
Features" screen. Use the
ADJUST buttons to select
"Set the Timer." Press ENTER.
Use the ADJUST buttons and
the ENTER button to set Day
(Mon-to-Fri, Everyday, Sun
Sat)_, Start time, Antenna, and
Channel.
After ,,_etting the timer, the
indicaLor will blink in green
when the TV is turned off.
If you press the CANCEL
button while setting the timer,
the arrow will move to the
pre_rious item. To clear the
timer, press CANCEL with the
arrow next to "Day."
_Important:
When the timer turns the TV on, the display will flash. If you do
not press any remote control buttons w:ithin 5 minutes after the TV
turns on, the TV will automatically turn off. Press a fu.nction
button (such as the display button) to keep the TV on and to turn
off the flashing display.
Using the Advanced Features 77