Mitsubishi TS-4545 Owner's Manual page 83

SQV
_Important:
_Important:
Using SuperQuickView (cont.)
adding channels directly to the list with the remote
control's SQV button
O Use the channel controls or number buttons to tune the TV to
the channel you want to add to the list.
O Press and hold the SQV button for about 2 seconds; the letters
"SQV" will appear under the channel number, indicating that
the channel has been added to SuperQuickView memory.
Once you've added a channel to the SQV memory, the letters "SQV"
appear under the channel number any time the channel number is
displayed, even if you tune to the channel in another manner.
If the SuperQuickView memory is full, the letters "SQV" will flash
when you hold the SQV button for about 2 seconds. Use the steps
below and on the preceding page to replace a current
SuperQuickView channel with a new channel.
removing channels from the list with the remote control's
CANCEL button
O Use steps O - _ from "customizing the SuperQuickView list
with the menus" on the preceding page to select the channel
position from the SuperQuickView list.
Press the CANCEL butt;on on the remote control to clear the
entry. You can now add a SuperQuickView channel to the
blank entry.
83