Mitsubishi TS-4545 Owner's Manual page 73

_Important:
[:>Important:
Customizing the A/V memory position (cont.)
The Monitor Out function determines how the TV will send an
audio signal to an audio system or home theatre receiver. ,four
choices are "Variable" or "Fixed".
• If you choose Fixed, the TV will send out an audio signal at a
fixed volume level. The level will not change when you adjust
the TV's volume. Use the controls on your audio system to
adjust the volume. The :fixed setting is most useful when you
can control the audio system's volume with a remote control.
• If you choose Variable, the TV's audio output will change when
you adjust the TV's volume. If you use this setting with an
audio system, turn the :FV's volume all the way down, set the
audio system's volume to an average s_,tting, and then adjust
the TV's volume until you carl hear the signal.
For proper tone and volume balance, you should turn off the TV's
speakers when using an external audio system.
If you have connected your TV to a Dolby Prologic Surround
receiver, or Dolby Surround receiver using the TV's variable audio
output, please set the Audio surround mode to "off". If your TV's
surround setting is "simulate" or "hall", the surround receiver may
not provide the proper surround sound effect.
Getting Started 73