Tv Main Panel - Mitsubishi LT-46149 Owner's Manual

8 1. Television Overview
TV Main Panel
1. ANT l/ANT 2 (Antenna)
If you are connecting an antenna or direct cable service
without a cable box, connect the main antenna or cable
source to ANT 1. Use ANT 2 for a second source. ANT 1
and ANT 2 can each receive digital and analog over-the-
air channels from a VHF/UHF antenna or non-scrambled
digital/analog cable source.
ANT l/MAIN and CableCARD
TM
Use ANT l/MAIN to receive premium subscription cable
TV service authorized by the CableCARD
TM
access card.
The CableCARD access card is provided by your local
cable company.
2. Component Video (INPUT 1, INPUT 2)
Y Pb Pr Component Video (480i/480p/720p/1080i)
Use these jacks to connect devices with component
video outputs, such as DVD players, external HDTV
receivers, or compatible video game systems. Use the
adjacent AUDIO R and L jacks for INPUT 1 or INPUT 2
if you wish to send audio to the TV. See Appendix B
specifications for signal compatibility.
3. AUDIO L and R (INPUT 1, INPUT 2)
Analog stereo inputs shared by more than one video input.
• Use INPUT 1 audio jacks with INPUT 1 component
video (Y Pb Pr) or INPUT 1 composite video (single
yellow cable).
• Use INPUT 2 audio jacks with INPUT 2 component
video exclusively.
4. HDMI
TM
Inputs (High=Definition
Multimedia Interface)
The HDMI inputs support uncompressed standard and
high-definition digital video formats and Dolby® Digital
and PCM digital stereo audio.
Use the HDMI inputs to connect to CEA-861 HDMI com-
pliant devices such as a high-definition receiver or DVD
player. These inputs support 480i, 480p, 720p, 1080i,
and 1080p video formats.
Mitsubishi recommends you use category 2 HDMI cables,
also called high-speed HDMI cables, to connect HDMI
1.3 source devices. High-speed category 2 cables bring
you the full benefits of Deep Color and x.v.Color.
These HDMI inputs can also accept digital DVl video signals.
To connect a DVl input, use an HDMI-to-DVl adapter or
cable plus analog audio cables. Connect the analog audio
cables to the DVI/PC INPUT AUDIO jacks on the TV to
receive left and right stereo audio from your DVl device.
The TV's HDMI inputs are compatible with many DVI-D
and HDMI computer video signals. For additional infor-
mation on PC compatibility, see "Using the TV with a