Older Cable Box; Audio-Only Device - Mitsubishi LT-46149 Owner's Manual

26 3. TV Connections
& Connect either an S-Video or composite video
cable from VIDEO OUT on the VCR back panel
to a VIDEO composite or S=VIDEOjack on the TV
main panel. Connect only one type of video cable.
S-Video is preferable to composite video, if avail-
able.
Z To use the TV speakers with the VCR, connect left
(white) and right (red) audio cables from AUDIO OUT
on the VCR back panel to the associated INPUT
AUDIO L and R on the TV main panel. If your VCR
is mono (non-stereo), connect only the white (left)
cable.
Note:
When using this connection configuration with the
connections used in step 5, it is possible to view
live cable programs through the VCR Device. For
best picture quality always view live cable programs
directly from the TV input connected to the cable
box device.
Older Cable Box
Required: One coaxial cable.
Note: This connection is not recommended. The
other connections described in this chapter
provide better quality audio and video to the TV
and allow NetCommand to work with the cable
box.
Connect the incoming cable to IN on cable box.
Connect one coaxial cable from OUT on the cable
box to ANT 1 on the TV main panel.
ANT_f_JN
Incoming
cable
Cable
box
TV main panel 2.
=
3,
4,
If you wish to connect an audio-only device to the TV, such
as an audio CD player or an MP3 player, follow these instruc-
tions. The side panel offers the most convenient jacks for this
purpose, but you can use the rear-panel jacks as well.
1. Insert an unused RCA-style connector into the
VIDEO/Y jack. The presence of this connector acti-
vates the TV's Auto Input Sensing feature.
When the Auto input Sensing screen displays,
name the new input CD/Audio or MP3 Player.
Connect left (white) and right (red) audio cables from
AUDIO OUT on the device to AUDIO L and R on the TV.
Keep the connector in the VlDEO/Y jack while using
the audio-only device.
TV back
TV side
panel
Y/
VIDEO
®
Audio=only device
Figure 11. First insert an unused RCA-type connector
into the VIDEO/Y jack on the TV side or main panel
before connecting audio cables.
Figure 10. Connecting an older cable box