Mitsubishi LT-46149 Owner's Manual page 23

3. TV Connections 23
Receiver,
Connect DVI devices (digital only) to the TV's HDMI
input jacks.
Analog stereo audio cables and a DVl-to-HDMI cable or
DVl/HDMI adapter and HDMI cable are required.
1, Connect the DVl-to-HDMI cable (recommended) or
HDMI cable with DVl/HDMI adapter from the DVl
device's back panel to the TV's HDMI jack.
Note: If you are using a DVl/HDMI adapter, it is impor-
tant to connect the adapter to the DVl device for
best performance.
Connect a set of audio cables from AUDIO OUT
on the DVl device back panel to the DVI/PC INPUT
AUDIO on the TV main panel. Connect the red
cable to the R jack and the white cable to the L
jack.
Note: The HDMI connection supports copy protection
(HDCP).
Some devices require connection to an analog input
first in order to view on-screen menus and to select DVl
as the ouput. Please review your equipment instruc-
tions for DVl connectivity and compatibility.
TV
main
panel
Digital DVl device
StandardCable Box, Sa
or Other Device with
Required: S-Video cable and left/right analog stereo
audio cables.
1, Connect the cable from the outside cable or satel-
lite service to CABLE IN or SATELLITE IN on the
cable box or satellite receiver.
Connect an S-Video cable from S-VIDEO OUT on
the cable box or satellite receiver back panel to
INPUT 3 S-VIDEO on the TV main panel.
3, Connect left (white) and right (red) audio cables
from AUDIO OUT on the cable box or satellite
receiver to INPUT 3 AUDIO L and R on the TV main
panel.
Note: Refer to the cable box or satellite receiver
Owner's Guide for cable or dish antenna con-
nections to the receiver.
Any S=Video
device
Figure 4. Connecting a device with S-Video
Figure 3. Connecting a digital DVI device