Television Overview - Mitsubishi LT-46149 Owner's Manual

1. Television Overview 7
NetCommand for HDMI
HDMI devices with Consumer Electronics Control (CEC)
capabilities may be compatible with the TV's NetCom-
mand for HDMI feature. Compatible devices can
receive control signals through the HDMI connection.
The TV's remote control may be able to operate some
functions of these devices.
GalleryPlayer
GalleryPlayer allows you to transform your TV into
an art showcase. Beautiful high-definition images
for display on your TV are available for purchase at
Mitsubishi.GalleryPlayer.com. Several sample images
are provided with the TV. See page 50.
Sound Projector
Sound Projector technology uses the TV's bank of 16
speakers to create a simulated surround sound effect
by reflecting sound off walls. Sound Projector lets you
customize the effect to match your room dimensions
and layout.
TV Guide Daily interactive Program Guide
System
The TV Guide Daily system is an on-screen program
guide for cable and over-the-air reception. This sub-
scription-free guide system lists regular, digital, and
high-definition programming. Note that when the
system is first set up, it may take up to 24 hours to
begin receiving TV program listings.
Control Panel
Buttons on the control panel duplicate commonly used
keys on the remote control. The upper labels show
control functions when no TV menus are displayed; the
lower labels indicate functions when TV menus are dis-
played or when a special function has been activated.
See "Remote Control," page 30, for a full description of
the functions of these buttons.
ROWER SYSTEM, VOL" , OH A FORMATMENU GUIDE INPUT -_ 1
@ @ @ @
" t • ADJ • _ ADJ D- ENTER MENU CANCEL J
System Reset Button
If the TV falls to respond to the remote control, con-
trol-panel buttons, or will not power on/off, press the
SYSTEM RESET button on the control panel.
The LED on the front panel will flash quickly for about
one minute. When the LED stops flashing, you may turn
on the TV. Recent setting changes you made before
using SYSTEM RESET may be lost.
A/V Reset
If you wish to reset the A/V (Audio/Video) settings back
to the factory defaults:
• To reset all settings at once, press GUIDE a nd FORMAT
on the control panel at the same time.
To reset the defaults for individual inputs, use the
Reset selection on theAV menu. See "AV Menu,"
page 38.
Convenience inputs
= iNPUT 4 is a readily accessible
set of input jacks for a cam-
corder, game, or other audio/
video device.
A USB photo port lets you view
JPEG images from a USB drive
or card reader.
Note:
To connect a standard composite
video device, connect the single
video cable (usually yellow) to the
Y/VIDEO jack.