Mitsubishi LT-46149 Owner's Manual page 17

2. TV Setup 17
About Home-Theater Control Systems
This summary offers some examples of the control methods available using the TV's remote control.
wish to use one or more of these methods in your home theater after completing Auto Input Sensing.
You may
Remote Control Programming with Any Connection Type
Program the remote control to operate the A/V device. To control the device, set
the slide switch to the correct position for the device type. See Appendix C, "Pro-
gramming the Remote Control." In the case of an A/V receiver, use the Audio Lock
feature, page 71.
I Any Connection Type I
NetCommand Control with Any Connection Type
Set up NetCommand IR control of the device's keys as desired. See "IR Emitter
Placement," page 56, and "Initial NetCommand Setup for Most Devices," page 57.
I Any Connection Type I
CEC=Enabled HDMI Device with HDMI Connection Only
1. Turn on the TV's NetCommand for HDMI feature. See the instructions in Appen-
dix E, "NetCommand HDMI Control of CEC Devices," page 81.
2. Experiment with the TV's remote control (slide switch set to TV)to determine
which device functions it can operate.
A/V Receiver with HDMI Output (no CEC)
1. Assign the device to an A/V receiver input to allow you to set up NetCommand
IR control of the A/V receiver's keys as desired. See "IR Emitter Placement,"
page 56, and "Setting Up NetCommand Control of an A/V Receiver," page 61.
2. Set up NetCommand IR control of the source device's keys as desired. See
"Initial NetCommand Setup for Most Devices," page 57.
Any Con- }
nection Type
CEC=Enabled HDMI A/V Receiver
1. Turn on the TV's NetCommand for HDMI feature. See the instructions in Appen-
dix E, "NetCommand HDMI Control of CEC Devices," page 81.
2. Try using the TV's remote control to operate the A/V receiver's volume and mute
functions.
3. If the source device you want to connect also has CEC capability, see Appendix
E for setup.
4. Try using the TV's remote control to determine which device functions it can
operate. For example, on a CEC-enabled DVD player, check for a response
to the (_ (PLAY), (_ (PAUSE), and (_ (STOP) keys. For a cable box, check for a
response to OH/PAGE A/V.