Mitsubishi LT-46149 Owner's Manual page 85

Appendices 85
Control=Panel To re-enable the Press and hold the MENU button Allows the control panel to be
Lock Release control-panel buttons on the control panel for over eight unlocked if the remote control is
after activation of the seconds. This works even if the TV misplaced.
Control-Panel Lock is powered off.
rstem Reset If the TV does not turn Press the SYSTEM RESET button on the
on or off, does not control panel.
respond to the remote
control or control-
panel buttons, or has
audio but no video.
i
TV Reset
IMPORTANT:
Use this reset
only if all other
resets have
been unsuc-
cessful.
To reset all consumer-
accessible settings
and all memories to
the original factory
defaults.
CAUTION: All owner-
performed setups
and adjustments will
be erased, includ-
ing NetCommand IR
setups.
1. While viewing the TV, press MENU
to display the TV Main menu.
2. With the Main menu displayed,
press number keys 1 2 3 to
display the Reset menu.
3. READ THE ON=SCREEN
WARNING AND INSTRUC=
TIONS.
= If you do not wish to use this
reset, press EXIT or MENU to
back out.
• If you do wish to use the
reset, press ENTER to erase all
memories and settings.
The TV will turn off and the green
LED will flash quickly for about
one minute. When the green LED
stops flashing, you may turn on the
TV. The changes you made most
recently, before using SYSTEM RESET,
may be lost. Changes you made
...... previous!y! h°wever! are n°t lost: ................
The TV will start the initialization
process. The TV will then turn off
and the front green LED will start
flashing. When the LED stops
flashing, you can turn the TV on
again. The Parental Lock Pass
code will remain unaffected, but
all other memories and settings
outlined in this Owner's Guide
will need to be set again.