Remote Control; Status Display; Fav (Favorite Channels) - Mitsubishi LT-46149 Owner's Manual

30 4. TV Operation and Features
Remote Control
1. POWER: Turns TV power on and off.
2. Slide Switch: Selects the A/V device to be oper-
ated by the remote control. Set the slide switch
to TVfor operation of the TV, and NetCommand-
controlled devices. Control of additional devices
requires programing (see Appendix C, "Program-
ming the Remote Control."
3. SLEEP: Sets the TV to turn off within 2 hours in incre-
ments of 30 minutes.
.
Digits/Letters: Press digits for channel numbers,
then press ENTER for faster tuning. Use numbers
and the_ key to enter digital sub-channel
numbers. Use also for entering letters or names in
menus.
.
To select letters when naming channels, repeatedly
press the associated number key. Press ENTER to set
the letter. Special characters are available with the 1
key (!, &, blank space) and 0 key (/, *, -).
-/CANCEL(SUB-CHANNEL/CANCEL): When entering digital
channel numbers, adds a separator between main
and sub-channel numbers. Clears Fav and some
menu entries.
6. QV (QuickView'M): Switches between the current
channel and the last channel viewed.
7. MUTE: T urns TV sound on and off.
8. SPLIT: N ot used in this model.
9. FAY (Favorites): Scans through memorized lists of
favorite channels. See Setup > Edit > Favl-Fav6
on page 47.
10. VOL A/v (Volume Up/Down): Changes sound
level.
11. CHIPAGE A/V (Channel or Page Up/Down):
Scans up or down through memorized channels.
Pages up and down through screens when used with
ChannelView or the TV Guide Daily system.
12. FORMAT: Changes the shape and size of the TV
picture.
13. Not used.
14. INPUT: D isplays the Input Selection menu from
which you can select an input source to view, such
as an antenna input (ANT 1/2) or a connected
device.
15. ,ik Y 41 1_(Adjust Up/Down/Left/Right): Navigate
menus and change settings.
16. ENTER: Selects a channel number or menu item.
17. GUIDE: D isplays or removes ChanneIView
TM
channel
listings or, if enabled, TV Guide Daily listings for
ANT 1 and ANT 2. Displays DVD disc or top menu
for a NetCommand-controlled DVD player. Dis-
plays the guide for a NetCommand-controlled cable
box or satellite receiver.
18. INFO: Displays an on-screen summary of the current
device in use and any broadcast information available,
including current V-Chip ratings information. See
"Status Display" on page 32 for details.
19. AUDIO: S elects individual audio settings to adjust.
See page 43 for a description of audio settings.
20. VIDEO: S elects individual video settings to adjust.
See page 42 for a description of video settings.
21. MENU: D isplays the main TV menu. When a sub-
menu is open, backs up one menu level.
22. EXIT:Closes TV on-screen menus/displays.
23. F1-F4
For devices under NetCommand control:
Perform NetCommand "Learning" to assign your
choice of functions to the F1-F4 keys.
For devices operating independently of
NetCommand: The F1-F4 keys work like the A,
B, C, D buttons on some cable boxes, satellite