Mitsubishi LT-46149 Owner's Manual page 20

20 2. TV Setup
The CableCARD
TM
system allows your TV to receive,
decode, and unscramble the premium digital channels
included in your cable TV subscription without the use
of a cable box. The system is unidirectional, meaning
that certain digital cable services, such as requests
for video-on-demand and pay-per-view programs, a
cable operator's enhanced program guide, and data-
enhanced television services may require use of a
set-top box instead. For more information, call your
local cable operator.
Note:
CableCARD requires the TV's Fast Power On
setting. If you insert a CableCARD, the TV will
automatically override a Low Power setting and
change to the Fast Power On setting.
Installing a CableCARD
1, Connect your primary incoming cable to ANTI/MAIN
3,
on the back of the TV.
Power on the TV.
Insert the CableCARD
into the CableCARD
slot with the front of
the card oriented as
shown in the diagram
below.
TV main panel
To ANT 1
4, Wait a few moments while the CableCARD initial-
izes. A message will display on screen when initial-
ization is complete.
Displaying CableCARD Information
To display information needed by your service provider
to start cable service, press MENU and when the Main
menu appears, press 9 9 9.
Sample CableCARD information screen. Write down
the information before contacting your cable provider.
CableCARD Menu
Sample CableCARD menu
To display the CableCARD menu with links to applica-
tions from your cable provider:
1, While watching CableCARD, press INPUT to open the
Input Selection menu.
With the CableCARD icon highlighted, press MENU to
open the CableCARD menu.
3, Press A V to highlight a link, then press ENTER to
access the linked page.
4, To redisplay the CableCARD menu, repeat steps 1
and 2.
Press EXIT to return to TV viewing.
If there are technical problems with the CableCARD, an
error screen automatically displays with information that
may be needed by your cable provider when you call
them for assistance.
Moving Through Other CableCARD Screens
In addition to CableCARD menus, other CableCARD
application screens may display and require you to
make additional selections. When using these screens
on your Mitsubishi television:
• Blue text denotes a function. Press ENTER to perform
the function.
You cannot move backward through the links. To
exit the CableCARD system, press EXIT.The CANCEL
key may not work with some CableCARD screens.
Contact your cable provider if you have any problems
with the application screen displays.