Mitsubishi LT-46149 Owner's Manual page 84

84 Appendices
TV Reset
Comparison Guide
You can resolve many common TV problems using
the reset functions described in the following table.
See also the troubleshooting suggestions later in this
appendix.
iMPORTANT
Before you change sound or picture settings: If
picture or sound settings seem wrong for a broadcast
channel (a channel from ANT 1, ANT 2, a cable box, or
satellite receiver), first check other channels from the
same input before changing settings. If most other
channels from the same input seem correct, there is
likely a problem with the broadcast rather than with the
TV. Use care in this case, as changes you make to fix
problems on individual channels also affect all other
channels on the same input.
Format
PerfectColor
TM
Reset
(for the single
input currently
being watched))
When the picture
shape seems incorrect
use FORMAT to change
the sha 3e of the
)icture.
When the color intensities 1.
seem out of balance, use
the PerfectColor reset to
reset the color balances
to the original factory
settings. 2.
Press the FORMAT key to cycle through
the available formats to find the best
format for the current 3icture.
=
While viewing the input to be
reset, press MENU to display the
Main menu with the A/V icon
highlighted.
Use I_ to highlight PerfectColor
and press ENTER to display the
PerfectColor adjustment screen.
Press CANCEL to reset the colors.
The last-used format for a signal
type is memorized for each input.
The next time the same input and
the same signal type is viewed,
the last-used format will be
recalled. .........................................
q
All PerfectColor sliders are reset
to the original center position. The
PefectColor settings for other inputs
remain unchanged.
A/V Memory When audio and/ 1. Whil_ viewing the input to be All Audio and Video settings
Reset for the individual input are
(for the single
input currently
being watched)
or video settings for
i
a single input seem
incorrect, use A/V
Memory Reset to
return the input to
the original factory
settings.
=
reset, _ress MENU to display the
Main menu with the A/V _con
highlighted.
Use P, to highlight the Reset
icon and press ENTER to reset.
reset except for the Listen To,
Language, audio Balance, and
Closed Caption settings.
all inputs) video adjustments for control-panel buttons GUIDE a nd returned to the
(for original factory
all inputs to the original FORMAT at the same time. settings, including Listen To and
factory settings. Language, plus Closed Captions
il settings and Format settings.
i
Channel To erase and 1. While viewing the TV, press MENU
Memorization re-memorize channels to display the Main menu.
on ANT 1 or ANT 2. 2. Press Y to highlight the Setup
icon.
3. Press _ to highlight the Scan
icon.
4. Press V to highlight the antenna
input and reception mode, e.g.
Ant 1 Air.
5. Press _ to highlight the Start
button icon and press ENTER to
start the memorization.
Lock Menu To change your Lock See the cutout page in Appendix A, Allows a new code to be
Pass Code menu pass code page 67. established.
All previously memorized chan-
nels for the selected antenna
2
input are erased and a new
set of memorized channels is
created. All custom settings for
Fav, channel names, and channel
locks are deleted. To add or
delete individual channels, see
Edit menu instructions on page
7.